An integrated Block Splitter and Turnover (SPT) is available in models to handle the output of three, four, five or six at-a-time concrete products machines. The SPT can operate sequentially or independently depending upon current production needs. In a single cycle, the SPT can split, turn or split and turn units. Counter controls can selectively turn only the base course, or they can count and turn partial pallet loads for handling odd block and mixed mold boxes.

Features

Bar Conveyor
Bar conveyor for 3 at-a-time concrete products machines with digital position sensor positioning. The rear table holds 24˝ wide (590 mm) x 32˝ long (790 mm) product.
S63 EZ Block Splitter
S63 EZ Block Splitter for splitting standard, architectural and retaining wall products. Splits units from 1-5/8˝ (41 mm) to 12˝ (305 mm) high and up to 24˝ (610 mm) wide. Includes:
- Rugged 1-1/4˝ (32 mm) steel plate frame
- Quick change blades and positioning
- Carbide tipped blades for four way straight splits
- Dual 6˝ (152 mm) bore, 12˝ (305 mm) stroke splitting cylinders for maximum splitting force
- 2.5 gallon (9.46 l) hydraulic accumulator
- Control panel with Allen-Bradley PLC and Allen-Bradley color graphic touch human machine interface (HMI)
- 24 Volt DC inputs
Brick and Block Turnover
Brick and Block Turnover feeds, clamps and turns all standard size block and brick. Handles product ranging from 1-5/8″ (41 mm) to 16″ (406 mm) tall. Includes:
- Orbital motors with speed control to power all movements, except clamping
- Clamp assembly for 16″ (406 mm) product with quick change pins on the clamp arms
- Quick adjust clamp pads
- 24 Volt DC inputs
Optional Enhancements

Powered Feed Conveyor
Powered feed conveyor (required when the splitter is not fed by a depalleter)
Bar Conveyor
Bar conveyor for 4, 5 or 6 units at-a-time, 8″ (200 mm) equivalents
Splitting Blades
24″ (610 mm) long straight blades for splitting product wider than 16″ (406 mm). Includes two 12″ (305 mm) top and bottom blades.
Turn Arm Package
24″ (610 mm) turn arm package is available for the turnover
V-Wheel Carriage
V-wheel carriage and quick disconnects to allow movement in and out-of-line
Controls
Allen-Bradley SLC 5/05 with color graphics touch HMI control station
Bar Conveyor Turntable
Waste Removal Systems