Curing Sensors

RTD/PT100 TEMPERATURE SENSOR

• Encased in silicon and installed in a galvanized pipe
• Provides thermal mass – increasing measurement reaction time
• Sensor artificially recreates the temperature inside the fresh concrete
• The signal transmitter on sensors is located away from the sensor and outside the curing area, protecting it from heat and moisture

THERMOCOUPLE TEMPERATURE SENSOR

• Used to measure internal concrete temperature which is usually required for structural concrete members
• Two wires twisted together and inserted into the concrete surface
• Must be cut to be removed
• Limited use on architectural surfaces
• Inexpensive and durable
• Consumed over a period of time

RELATIVE HUMIDITY SENSOR

• Condensate and dust resistant
• Able to measure 100 percent humidity without defaulting
• Accurate to +/- 2% rH
• Includes remote-mounted transmitters for years of trouble-free operation
• Filter cap requires periodic cleaning to prevent grit build-up