|
Setting
Total Machine Cycles on a Besser Concrete Products Machine
I reloaded the
EPROM on my concrete products machine, how do I set my "total machine
cycles?"
The "total
machine cycles" can be changed by entering the desired numbers into
the accumulated values of counters C5:1, C5:2 and C5:3.
TO CHANGE THE ACCUMULATED VALUE OF A COUNTER:
From the DATA TABLE DISPLAY SCREEN,
1. Press the F6 key.
The display will read:
|
PanelView
Screen
|
2. Press the F16 key. 3. Enter new value.
4. Press ENTER.
|
|
The
SLC shows here the accumulated value for this counter. |
| C5:1
= Hundreds Count
C5:2 = Thousands Count
C5:3 = Millions Count
000
,
C5:3 |
000
,
C5:2 |
000
C5:1 |
= Total
Machine Cycles |
|
|
|
