October 1999

SERVICE BULLETIN

Number 99-2

INSTALLING SCREEN PROGRAM IN PANELVIEW™ 900/1000 WITH A FLASH CARD

1. Turn off power to PanelView.
2. Insert flash card in back of PanelView (will only go in one way).
3. Turn on power to PanelView.
4. If the screen does not come up "Configuration Mode" press the left and right arrow keys at the same time. 
5. Press arrow key up or down to highlight memory card.
6. Press enter.
7. Press F2 (Restore from card).
8. Press F2 (Continue).
9. After the screen shows 100% complete and the main screen comes up, press the left and right arrow keys to return to "Configuration Mode".
10. Use the arrow keys to highlight memory card, then press enter.
11. Press F8 (Disconnect card).
12. Press F2 (Continue).
13. Remove card when screen displays "Remove Card".
14. Remove the flash card and store it in the original plastic box.
15. If the Run screen does not appear and the screen displays "Configuration Mode" then press F2 (Run Mode).

PanelView Screen