In instances when the vapor generator or heating equipment is located in an area with limited access, Kraft Energy™ recommends the use of a remote display and/or control panel. Kraft Energy offers three standard solutions but can customize a solution to fit any application.

Start-Stop Control

Start-Stop Control is a simple solution to access a vapor generator in a non-accessible area. It consists of a panel with green “Start” and red “Stop” push buttons with identification markings

Touch Screen Colour Graphic Interface

1. Standard on the Vapor Generator Series VS™ and may be added with AutoCure S7 300 series controls.
2. This screen operates in conjunction with the Siemens Simatic® S7 series central processor.
3. The interface features colour graphics and a series of screens that display information about the curing process, allow the user to change time, humidity, temperature, circulation and exhaust settings, operate doors and interface with transport equipment.
4. With this system, experience has proven that operator training is reduced by at least 50 percent and understanding of the curing process is dramatically increased.
   
   
   

PC Graphic User Interface

1. Operates on the concrete producer’s existing personal computer and is connected with the Kraft Energy™ supplied Siemens Simatic® S7 300 series central processor.
2. The interface displays graphics and screens that are similar to the Touch Screen Colour Graphic User Interface.
3. Icons are activated with PC mouse
4. This software can be used with Kraft Energy Systems VaporWare™ curing data recording and storage software.

AutoCure™ - Concrete Curing Controls:
Timer & Thermostat Controls  .  Millenium Curing Profile Control  .  MRC 7000 Controller & Chart Recorder
Siemens S7 300  .  Remote Display & Control  .  Curing Sensors  .  Curing Data Recording
Data Loggers  .  Vapor Control Valve and Distribution Pipe