Brick and Block Turnovers

Besser Brick and Block Turnovers are available in models to handle the output of three, four, five or six-at-a-time concrete products machines. Besser offers producers the widest range of turn control options on the market. All Besser turnovers are equipped with counter-controls that can selectively turn only the base course, or they can count and turn partial pallet loads for handling odd block and mixed mold boxes accurately.

Brochure (Requires Acrobat Reader)

Standard Features

• Encoder on bar conveyor

• Infeed is designed to store an extra block to permit continuous depalleting

• Infeed bar conveyor has two speeds for gentle
  product handling at high speeds

• Hydraulic cylinders on the clamps provide maximum
  product control

• Clamp pads are made of segmented rubber-faced
  steel to provide maximum product control for varying
  end core configurations and product sizes

• Quick change pins on the clamps allow simple
  adjustments for various product sizes

• Turn mechanism is harmonic motion for smooth
  operation at high speeds

• Discharge slat conveyor with pop-up quick release
  transition roller at discharge end for safe, smooth
  product handling

• 2-1/2 gallon (9.46 liters) accumulator

• "All turn" or "no turn" Allen-Bradley 5/03^TM controls

Options

• Additional length on bar conveyor
• V-wheel carriage and quick-connects to allow movement in and out of line

Weight

• 1950 lbs (878 kg)

Product Capacity

• Turns product ranging from half high block up to 24" (610 mm) tall

• Turns brick and slabs in groups – up to 16 brick or 8 slabs at-a-time

Hydraulic Requirements

• 11.4 gallons (51.8 liters) per minute peak consumption at 750 psi

Voltage

• Power: 460 V., 3 phase, 10 amps
  (other voltages available)

Technical Service Tips