These concrete masonry units can be used above and below grade for a wide variety of applications. Below grade these units allow adequate width for a standard loadbearing wall, insulation and veneer. Above grade these units are used for walls in large buildings such as schools, stores and warehouse facilities.

The units shown are usually made in two compartments of a 7-5/8" (190 mm) mold by removing one inside division plate and spacing the cavity to the desired width. The core assembly is on a double core plate allowing use of a standard 7-5/8" (190 mm) wide mold top plate and cutoff parts.

Additional information is available by contacting our mold sales manager, at (989) 354-1017 or via e-mail at sales@besser.com.

Concrete Unit Drawing #395423

Concrete Unit Drawing #374888

Concrete Unit Drawing #387465

Concrete Unit Drawing #442510

Note: Drawings from non-electronic format have been updated.