masonry | landscape | pipe | precast | prestressed | ready-mix

Service Parts

Outside Division Plate and Face Liner Combination

This design allows quick, easy changing or reversing of the mold face liner without disassembling the mold box. This design permits hardening to a greater depth which makes the liner more abrasion resistant without sacrificing flexibility. The liner has two usable surfaces doubling its service life. The face liner is available in any of the standard mold heights and lengths. Additional sizes and styles are available. Parts are also available in metric sizes.

 

Part No.  Description
8-1/4" High
072665 Division Plate & Liner Assembly - 15-5/8" Mold
070159 Division Plate Only (Replacement item) - 15-5/8" Mold
070160 Face Liner Only (Replacement item) - 15-5/8" Mold
072666 Division Plate & Liner Assembly - 17-5/8" Mold
071123 Division Plate Only (Replacement item) - 17-5/8" Mold
071648 Face Liner Only (Replacement item) - 17-5/8" Mold
9-1/4" High
200545
 Division Plate Only - 15-5/8" Long (Metric: No. 341585M)
072238 Face Liner Only - 15-5/8" Long (Metric: No. 341588M)
310012 Division Plate Only - 17-5/8" Long (Metric: No. 355815M)
072926 Face Liner Only - 17-5/8" Long (Metric: No. 355816M)
10-1/4" High
079034 Face Liner Only - 15-5/8" Long (2" Higher at Top)
Low Height
(4-7/8" High)
281515 Division Plate Only - 15-5/8" or 17-5/8" Long
327714 Face Liner Only - 15-5/8" or 17-5/8" Long
Additional Parts
103702 Socket Head Cap Screw w/NyLock (4 required per liner)
087814 Hex Nut - 1-1/2"
087910 Shakeproof Washer - 1-1/2"
Center and Inside Division Plate with Threaded Tangs

Use this division plate to prevent spreading of the mold side bars when producing solids or other difficult units. It is necessary to drill the side bars to accommodate these plates. Additional sizes and styles are available. Parts are also available in metric sizes.


Center Division Plate with Threaded Tangs, 9-1/4" High x 3/4" Thick
No. 057589 Center Division Plate with Threaded Tangs for 7-5/8" High x 15-5/8" Long Units
Inside Division Plate with Threaded Tangs, 9-1/4" High x 1/2" Thick
No. 079497 Inside Division Plate with Threaded Tangs for 7-5/8" High x 15-5/8" Long Units
No. 234025 Inside Division Plate with Threaded Tangs for 7-5/8" High x 17-5/8" Long Units
No. 087810 Hex Nut - 1"
No. 087908 Shakeproof Washer - 1"

Mold Face Liners with Ribs

Face liners with single or multiple ribs are designed for use on outside division plate No. 200545 for 15-5/8" long units. All face liners are 9-1/4" high. Additional sizes and styles are available. Parts are also available in metric sizes.

 

 

Part No. Description
No. 103702 Socket Head Cap Screw with Nylock
No. 204687 With One 3/8" Sq. Rib One Side
No. 324659 With Two 3/8" Sq. Ribs One Side
No. 286593 With Three 3/8" Sq. Ribs One Side
No. 259327 With Four 3/8" Sq. Ribs One Side
No. 294277 With Five 3/8" Sq. Ribs One Side
No. 291628 With Seven 3/8" Sq. Ribs One Side
No. 338397 With Nine 3/8" Sq. Ribs One Side

 

 
Besser Company,  801 Johnson Street, Alpena,  MI  49707 USA , 989.354.4111 | email:  sales@besser.com | Employee Login